|
|
Post by Christian Hugon on Nov 20, 2015 21:31:32 GMT 1
Hello, we received a question about the dimensions of the Swift. Until now, I did some measures of the winglets, the wing and the cell. You will find these documents here under. I have other documents but I'm busy to ask the permission to put them on the site     |
|
|
|
Post by simeybinker on Nov 22, 2015 2:06:33 GMT 1
|
|
|
|
Post by simeybinker on Nov 22, 2015 2:24:29 GMT 1
And Christian, can you post larger photos of the foil profiles such that the dimensions are shown?
|
|
|
|
Post by Christian Hugon on Nov 22, 2015 21:42:03 GMT 1
Hello Sim, I will try to make better pictures of the foil profile. Let me time For the other dimensions, I put the documents made by Jac when we were busy to find a firm to develop our trailer. Thanks to him to let these documents public. IMPORTANT Postcriptum : these mesures were made by J. Bott without guarantee     |
|
|
|
Post by Christian Hugon on Nov 22, 2015 22:02:47 GMT 1
For the foil profile, see this link and let me know if it is better foil profile |
|
|
|
Post by Christian Hugon on Dec 1, 2015 17:29:04 GMT 1
Other documents   |
|
|
|
Post by Christian Hugon on Oct 17, 2018 17:23:25 GMT 1
Measures of the inside of the fuselage  |
|
|
|
Post by Christian Hugon on Aug 18, 2019 11:38:25 GMT 1
For the people interested by the profile I estimated to develop the "wing transporter" (see the article in the thread "modification"), I give you three ".pdf document" that you can use. Pay attention : these measures are not perfect the good measures but are done following a approximative method to develop the "wing transporter" Link : www.dropbox.com/sh/4b1uxtobwh4qhtm/AAB7QfVEGJnczTC-xbig0UbVa?dl=0Regards Christian |
|
|
|
Post by mike leger on Aug 20, 2019 15:20:03 GMT 1
Thank you Christian!
Are all of the airfoil profile numbers in percentage of chord length?
Mike
|
|
|
|
Post by Christian Hugon on Aug 20, 2019 18:20:32 GMT 1
Chord length (I think that all is in cm).
The centre profile is an approximation of a profile in the centre of the wing perpendicular to the leading edge based on the two profiles (tip wing and root profile). See the little drawings I wrote on each document
Regards
Christian
|
|
keydet
Junior Member
Posts: 34 
Name / Surname: Reynolds Renshaw
Main flying location: Region, Country: Blue Ridge Mountains, USA
Two or three axes controls: Three axes
Administered_by: Christian
|
Post by keydet on Jun 19, 2022 12:36:29 GMT 1
I have found this information very helpful during my conversion from Swift Lite to PAS. Thank you. Have you posted your weight and balance data? I measured yesterday: 98.9 kg. Is this too heavy? I weigh 90 kg. I believe this puts me very close to MTOW.
Thank you,
Keydet
|
|
|
|
Post by Christian Hugon on Jun 19, 2022 15:57:32 GMT 1
|
|
